Konica Minolta II manual Technical Details, Aps

Page 36

TECHNICAL DETAILS

Type:

Film transport, fixed sensor, 1 pass scan film scanner

Usable Film:

Medium format film (6x4.5, 6x6, 6x7, 6x8, 6x9) – positive/negative, colour/B&W;

 

35mm film - positive/negative, colour/B&W;

 

Transmission Electron Microscope film – (5.9 x 8.2cm) positive/negative,

 

colour/B&W;

 

 

 

16mm film – positive/negative, colour/B&W;

 

APS sleeve film – positive/negative, colour/B&W

 

APS Casette (with optional adapter) – positive/negative, colour;

Scanning Dimensions:

35mm

24.20 x 36.30mm

2688 x 4032 pixels

 

6 x 4.5

56.16 x 41.76mm

2496 x 1856 pixels

 

6 x 6

56.16 x 56.16mm

2496 x 2496 pixels

 

6 x 7

56.16 x 64.80mm

2496 x 2880 pixels

 

6 x 8

56,16 x 78,08mm

2496 x 3472 pixels

 

6 x 9

56.16 x 83.52mm

2496 x 3712 pixels

 

TEM

56.16 x 82.00mm

2496 x 3712 pixels

 

APS

17.28 x 29.95mm

1920 x 3328 pixels

 

16mm

13.00 x 19.50mm

2688 x 4032 pixels

Optical Input Resolution:

2820dpi: 35mm, APS, and 16mm film

 

 

1128dpi: Medium format and TEM film

 

A/D Conversion:

12-bit

 

 

Image Sensor:

RGB 3-line CCD (2700 pixels)

 

Continuous Scan Max.:

35mm Sleeved: 6 frames

 

 

35mm Mounted: 4 frames

 

 

APS Cassette (requires optional accessory): 40 frames

 

35mm Mounted with optional Slide Feeder: 50 frames

Interface:

SCSI-2

SCSI Ports:

D-Sub 25 pin, Centronics 50

Light Source:

Hot cathode fluorescent lamp, 3 wavelength, user replaceable.

Power/Frequency:

AC 100 – 240V, 50/60Hz

Dimensions:

(w)200 x (d)410 x (h)124mm (7.9 x 16.1 x 4.9 in.)

Weight:

Approximately 6kg (211.8 oz)

Specifications are based on the latest information available at the time of printing and are subject to change without notice.

34

Image 36
Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Package Contents Before YOU BeginSystem Requirements MacintoshNames of Parts FrontBack Setting the Scsi ID IBM PC/ATConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Getting Started Film EmulsionHandling Care Loading 35MM Film Holders Slide Mount Holder SH-M135MM Film Holder FH-M1 Press the cover firmly closed until it clicks Using the Medium Format Holder MH-M1 Loading the Medium Format Holder MH-M1Medium Format and TEM Film Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Inserting the Holder Into the Scanner EjectingAPS Adapter AD-100 Sold Separately APS Adapter Names of PartsLoading the Cassette Inserting the Adapter Ejecting the Adapter Remove the adapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Troubleshooting Symptom Cause/Action ReferenceSettings Control Panel Display Indicator Lamp Indicator Lamp Scanner StatusTechnical Details APSCustomer Service To determine the version number of your driver softwareFIN
Related manuals
Manual 7 pages 3.84 Kb