Konica Minolta II manual Plug the power cord into the scanner’s AC socket

Page 14

CONNECTING TO THE COMPUTER

3.Connect one end of SCSI cable B into the remaining SCSI port on the back of the scanner.

4.Connect the other end of SCSI cable B into the next device in the chain.

5.Flip the dip switch marked 1 down to turn the terminator off.

•Dip switches 2 through 4 are inactive. Their position will not affect the scanner operation.

6.Plug the power cord into the scanner’s AC socket.

12

Image 14

Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Package Contents Before YOU BeginSystem Requirements MacintoshNames of Parts FrontBack Setting the Scsi ID IBM PC/ATConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Handling Care Getting StartedFilm Emulsion Loading 35MM Film Holders Slide Mount Holder SH-M135MM Film Holder FH-M1 Press the cover firmly closed until it clicks Medium Format and TEM Film Using the Medium Format Holder MH-M1Loading the Medium Format Holder MH-M1 Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Inserting the Holder Into the Scanner EjectingAPS Adapter AD-100 Sold Separately APS Adapter Names of PartsLoading the Cassette Inserting the Adapter Ejecting the Adapter Remove the adapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Troubleshooting Symptom Cause/Action ReferenceSettings Control Panel Display Indicator Lamp Indicator Lamp Scanner StatusTechnical Details APSCustomer Service To determine the version number of your driver softwareFIN

Related manuals

Manual 7 pages 3.84 Kb