Konica Minolta II manual Inserting the Adapter

INSERTING THE ADAPTER

1. Press the power switch to turn

the scanner on. Turn on your computer, then launch the Dimâge Scan Multi II software.

• The green indicator lamp will blink slowly while the scanner is setting up.

2. Pull the accessory panel on the scanner straight out, then open it all the way pushing it until it clicks.

• Do not force the accessory panel.

• Do not open the accessory panel during the set-up process. Wait until set-up is complete and the indicator lamp is off.

3. Insert the holder into the scanner in the direction indicated by the white arrow on top of the adapter.

• Do not insert the adapter at an angle.

4. Gently push the adapter into the scanner until the raised

insertion mark is aligned with the film-slot door.

• The adapter will be automatically guided in past the mark.

• If the adapter is not loaded correctly, then eject and reinsert it.

26