Konica Minolta II manual 35MM Film Holder FH-M1

Page 18

35MM FILM HOLDER FH-M1

Use the FH-M1 for 35mm negatives and unmounted 35mm slide film.

•The 35mm Film Holder FH-M1 can hold film strips up to 6 frames long.

•Blow dust off the film before placing it into the film holder.

1. Position the film holder so the white arrow is on the top-left side, then open the slide mount.

• Open the slide holder by pushing up on the two tabs from underneath.

2, Place the film in the film holder emulsion side down.

3. Align the frames within the scanning windows.

16

Image 18

Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Package Contents Before YOU BeginSystem Requirements MacintoshNames of Parts FrontBack Setting the Scsi ID IBM PC/ATConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Getting Started Film EmulsionHandling Care Loading 35MM Film Holders Slide Mount Holder SH-M135MM Film Holder FH-M1 Press the cover firmly closed until it clicks Using the Medium Format Holder MH-M1 Loading the Medium Format Holder MH-M1Medium Format and TEM Film Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Inserting the Holder Into the Scanner EjectingAPS Adapter AD-100 Sold Separately APS Adapter Names of PartsLoading the Cassette Inserting the Adapter Ejecting the Adapter Remove the adapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Troubleshooting Symptom Cause/Action ReferenceSettings Control Panel Display Indicator Lamp Indicator Lamp Scanner StatusTechnical Details APSCustomer Service To determine the version number of your driver softwareFIN

Related manuals

Manual 7 pages 3.84 Kb