Konica Minolta II manual Rotating the Frame

Page 24

ROTATING THE FRAME

The image area of the Medium Format Holder MH-M1 can rotate 10 degrees in either direction to compensate for a tilted image composition. By rotating the frame before scanning, the need to rotate the scanned image, thus resampling the pixels, is eliminated.

1. Turn the holding screw counter clockwise to loosen it.

2. Rotate the carrier as desired.

• Use the angle scale on the holder for reference.

• With larger film formats, the corners of the frame may not fit in the scanning area when the carrier is rotated.

3. Turn the holding screw clockwise to secure it.

22

Image 24

Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Package Contents Before YOU BeginSystem Requirements MacintoshNames of Parts FrontBack Setting the Scsi ID IBM PC/ATConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Getting Started Film EmulsionHandling Care Loading 35MM Film Holders Slide Mount Holder SH-M135MM Film Holder FH-M1 Press the cover firmly closed until it clicks Using the Medium Format Holder MH-M1 Loading the Medium Format Holder MH-M1Medium Format and TEM Film Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Inserting the Holder Into the Scanner EjectingAPS Adapter AD-100 Sold Separately APS Adapter Names of PartsLoading the Cassette Inserting the Adapter Ejecting the Adapter Remove the adapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Troubleshooting Symptom Cause/Action ReferenceSettings Control Panel Display Indicator Lamp Indicator Lamp Scanner StatusTechnical Details APSCustomer Service To determine the version number of your driver softwareFIN

Related manuals

Manual 7 pages 3.84 Kb