LOADING 35MM FILM HOLDERS
SLIDE MOUNT HOLDER SH-M1
•The slide mount holder can hold up to 4 mounted slides (35mm or APS).
•Slide mounts must be thicker than 1mm and thinner than 2mm to fit properly into the holder.
•Results of scanning
•Blow dust off the slide before placing it into the film holder.
1.Position the slide mount holder so the white arrow is
on the
• Open the slide holder by pushing up on the two tabs from underneath.
2. Place the slides within the indentations, making sure they lie flat.
• Insert the slides emulsion side down.
3. Press the cover firmly closed until it clicks.
15