Konica Minolta II manual For Proper and Safe USE

Page 3

FOR PROPER AND SAFE USE

Please read and understand each caution before using this product.

CAUTION

To avoid fire or electric shock:

Only use the voltage specified for this unit.

Do not expose this unit to liquids.

Do not insert metal objects into this unit.

Do not touch the cord or plug if your hands are wet.

Unplug this unit when it is not in use.

Improper use of the power cord may result in fire or electric shock.

Insert the plug securely into an electrical outlet.

Do not pull on the cord. Grasp the plug when removing the power cord from an

outlet.

Do not scratch, twist, modify, heat, or place a heavy object on the power cord.

Do not connect the ground to a gas pipe, telephone ground, or a water pipe. Improper grounding can result in electric shock.

This product must have sufficient ventilation while in use. Blocked ventilation ducts may cause the unit to overheat, increasing the risk of fire.

• Do not use or store this product in dusty or very humid areas.

If there is smoke, a strange smell, or any other unusual conditions, shut down and unplug the unit, then contact a Minolta Service Facility.

Do not attempt to disassemble this product. It contains high-voltage circuits. Take the product to a Minolta Service facility for repairs.

Unexpected damage may occur if this unit is left unattended near young children.

1

Image 3
Contents Hardware Manual USA For Proper and Safe USE Table of Contents Indicator Lamp Technical Details Customer Service Before YOU Begin Package ContentsMacintosh System RequirementsFront Names of PartsBack IBM PC/AT Setting the Scsi IDConnecting to the Computer Connecting to the Computer Plug the other end of Scsi cable a into Scsi device Plug the power cord into the scanner’s AC socket Plug the other end of the power cord into a grounded outlet Getting Started Film EmulsionHandling Care Slide Mount Holder SH-M1 Loading 35MM Film Holders35MM Film Holder FH-M1 Press the cover firmly closed until it clicks Using the Medium Format Holder MH-M1 Loading the Medium Format Holder MH-M1Medium Format and TEM Film Place the film in the film holder 16mm and APS Sleeve Film Place the film in the mask using the film guides Rotating the Frame Ejecting Inserting the Holder Into the ScannerAPS Adapter Names of Parts APS Adapter AD-100 Sold SeparatelyLoading the Cassette Inserting the Adapter Remove the adapter Ejecting the AdapterChanging the Fluorescent Lamp Connect the new lamp Important Before Transporting the Scanner Symptom Cause/Action Reference TroubleshootingSettings Control Panel Display Indicator Lamp Scanner Status Indicator LampAPS Technical DetailsTo determine the version number of your driver software Customer ServiceFIN
Related manuals
Manual 7 pages 3.84 Kb