ABC Office DC-2, MC-1 manual Set Record/Zone2 Input, Clear Record/Zone2 Input

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

7.3.22 Set Record/Zone2 Input

Sets the Record/Zone 2 input. If Record/Zone2 was inactive, this command will set the input then activate the Record/Zone 2 function.

7.3.22.1 Command Packet Description

Application Header:

Command	DC_CMD_SET_REC_INPUT	0x25
Data Count	1	0x01
Application Data:
Data[0]	InputId	nn

7.3.22.2 Data Description

InputId:
Data Type:	Unsigned 8 bit Integer
Max Value:	7
Conversion:	Input Id’s are defined in Appendix D Input Id’s

7.3.22.3DC-2/MC-1 Response

7.3.22.4Data Validation:

The InputId must be a valid Input Id. If it is not the DC-2/MC-1 will respond with a NAK packet and error code DC_ERR_ INVALID_INPUT_ID. If the input selection is disallowed(input blocked, digital input not selected…) DC-2/MC-1 will respond with a NAK packet and error code DC_ERR_INVALID_INPUT If the input is assigned the DC-2/MC-1 will respond with an ACK Packet.

7.3.23 Clear Record/Zone2 Input

Clears or Unassign’s the Record/Zone 2 input. If Record/Zone2 is active, this command will unassign the zone 2 input and set the record outputs to the main input source.

7.3.23.1 Packet Description

Application Header:

Command	DC_CMD_CLEAR_REC_INPUT	0x26
Data Count	1	0x01
Application Data:
Data[0]	InputId	nn

7.3.23.2 Data Description

InputId:
Data Type:	Unsigned 8 bit Integer
Max Value:	7
Conversion:	Input Id’s are defined in Appendix D Input Id’s

7.3.23.3DC-2/MC-1 Response

7.3.23.4Data Validation

The InputId must be a valid Input Id. If it is not the DC-2/MC-1 will respond with a NAK packet and error code DC_ERR_ INVALID_INPUT_ID. If the input is unassigned the DC-2/MC-1 will respond with an ACK Packet. If the record/zone 2 function was not active the DC-2/MC-1 will respond with an ACK packet.

27 of 44