ABC Office DC-2, MC-1 manual Host Sleep, Get Communication Configuration, Data Description

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

7.3.30 Host Sleep

By transmitting the Sleep command, the Host indicates it has just “powered down” and will no longer respond to DC-2/MC-1 Notifications. No Acknowledgment is expected.

7.3.30.1 Packet Description

Application Header:
Command	HOST_SLEEP	0x12
Data Count	0	0x00
Application Data:
	N/A

7.3.30.2 Data Description

N/A

7.3.31 Get Communication Configuration

Request to DC-2/MC-1 for the current communications configuration for the serial port and protocol. The DC-2/MC-1 responds to this command with a Communication Configuration Packet.

7.3.31.1 Command Packet Description

Application Header:
Command	DC_CMD_GET_COM_CONFIG	0x2F
Data Count	0	0x00
Application Data:
	N/A

7.3.31.2 System Parameter Values Response Packet

Application Header:
Command	DC_RESP_COM_CONFIG	0x8C
Data Count	1	0x01
Application	Data:
Data[0]	Configuration Register 0	nn

7.3.31.3	Data Description
Data Word	Bit	Definition
0	0	Acknowledge Enable
0	1	Parameter Change Enable
0	2	LED Acknowledge Enable

Acknowledge Enable:	TRUE	Indicates the DC-2/MC-1 will transmit Acknowledge Notification’s to
the Host.	FALSE	Indicates the DC-2/MC-1 will not transmit any positive Acknowledge
Notification messages. The DC-2/MC-1 will always transmit NAK error notification messages.
Parameter Change Enable: TRUE		Indicates the DC-2/MC-1 will transmit any parameter change
Notification as specified in the Parameter Change Notification Message.
Notifications.	FALSE	Indicates the DC-2/MC-1 will not transmit parameter change

31 of 44