ABC Office MC-1, DC-2 manual Set Zone2 Volume, Set Zone2 Left/Right Balance, Set Custom Name

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

7.3.24 Set Zone2 Volume

Commands DC-2/MC-1 to set the system volume with the value in this packet. 7.3.24.1 Command Packet Description

Application Header:
Command	DC_CMD_SET_ZONE2_VOLUME	0x27
Data Count	1	0x01
Application Data:
Data[0]	Value	nn

7.3.24.2 Data Description

Value:
Data Type:	Unsigned 8 bit integer.
Max:	92
Conversion:	0 = -80 dB
	92 = +12 dB

7.3.24.3 DC-2/MC-1 Response

The DC-2/MC-1 will assign the value from the packet to the zone2 volume.

7.3.24.4 Data Validation

If a value is passed that exceeds the maximum value of that parameter the DC-2/MC-1 will ignore the command and transmit a NAK command with an error code DC_ERR_INVALID_DATA.

7.3.25 Set Zone2 Left/Right Balance

Commands DC-2/MC-1 to set the Zone2 balance to the value in this packet.

7.3.25.1 Packet Description

Application Header:
Command	DC_CMD_SET_ZONE2_BALANCE	0x28
Data Count	1	0x01
Application Data:
Data[0]	Value	nn

7.3.25.2 Data Description

Value:
Data Type:	Unsigned 8 bit integer.
Maximum Value:	32
Conversion:	0 = Left
	32 = Right

7.3.25.3 DC-2/MC-1 Response

The DC-2/MC-1 will assign the value from the packet to the Zone2 balance.

7.3.25.4 Data Validation

If a value is passed that exceeds the maximum value of that parameter the DC-2/MC-1 will ignore the command and transmit a NAK command with an error code DC_ERR_INVALID_DATA.

7.3.26 Set Custom Name

Sets the Custom Name that can be displayed when the unit powers up.

28 of 44