ABC Office manual Set Input Name by Id, 26.3 DC-2/MC-1 Response, 27.3 DC-2/MC-1 Response

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

7.3.26.1 Packet Description

Application Header:

Command	DC_CMD_SET_CUST_NAME	0x2C
Data Count	1 + strlen(CustomName) + 1	nn
Application Data:
Data[0]	CustomNameEnable	nn
Data[1]-Data[DataCount-1]	CustomName	ch ch ch … 0x00

7.3.26.2 Data Description

CustomNameEnable:	Enables/Disables the Custom Name Display.
DataType:	Boolean
TRUE:	CustomName Enabled
FALSE:	CustomName Disabled
CustomName:
Data Type:	Null(0x00) terminated ASCII character string.
Max Length:	CUSTOM_NAME_LENGTH defined in Appendix E Protocol Constants.

7.3.26.3 DC-2/MC-1 Response

If the custom name enable is TRUE then the custom name banner is display on “power on”. If the Custom Name Enable is FASLE the custom name is not displayed. The CustomName string is copied to Nonvolatile RAM. The DC-2/MC-1 will Ack when completed with this command.

7.3.26.4 Data Validation:

If an invalid string is passed, DC-2/MC-1 will ignore the command and transmit a DC_NAK command with an error code DC_INVALID_DATA.

7.3.27 Set Input Name by Id

Sets an Input Name to the transmitted value for a given input.

7.3.27.1 Command Packet Description

Application Header:

Command	DC_CMD_SET_INPUT_NAME	0x2E
Data Count	strlen(InputName) + 2	nn
Application Data:
Data[0]	InputId	0 to 7
Data[1]-Data[DataCount-1]	InputName	ch ch ch ... 0x00

7.3.27.2 Data Description

InputId:
Data Type:	Unsigned 8 bit Integer
Max Value:	7
Conversion:	Input Id are defined in Appendix D Input Id’s
InputName:
Data Type:	Null(0x00) terminated ASCII character string.
Max Length:	INPUT_NAME_LENGTH defined in Appendix E Protocol Constants.

7.3.27.3 DC-2/MC-1 Response

DC-2/MC-1 will copy the InputName to the given input.

7.3.27.4 Data Validation:

29 of 44