ABC Office manual Send Display String Command, 34.3 DC-2/MC-1 Response, Data Description

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol			Printed on: 10/19/00
	Speaker	Id #
	Center	0
	Subwoofer	1
	Front Left	2
	Front Right	3
	Side Left	4
	Side Right	5
	Rear Left	6
	Rear Right	7

7.3.34.3 DC-2/MC-1 Response

The output ID will be verified for validity. The output adjustment will be range checked. The Output Id must be a valid Id number as stated in this document. If it is not the DC-2/MC-1 will respond with a NAK packet and error code DC_ERR_ INVALID_PARAM_NUMBER. If the output adjustment value is out of range the DC-2/MC-1 will respond with a NAK error DC_ERR_INVALID_DATA. Otherwise the DC- 2/MC-1 will set the adjustment value and respond with an ACK.

Sets the Custom Name that can be displayed when the unit powers up.

7.3.35 Send Display String Command

This command allows the Host to send a 40 character string to the Dc-2/Mc-1 for display on the OSD and Front Panel Displays.

7.3.35.1 Packet Description

Application Header:
Command	DC_CMD_SET_DISPLAY_STR	0x33
Data Count	1 + strlen(DisplayStr) + 1	nn
Application Data:
Data[0]	DisplayFlags	nn
Data[1]-Data[DataCount-1]	DisplayStr	ch ch ch … 0x00

7.3.35.2	Data Description
Display Command Flags:
Data Word	Bit	Definition
0	0	FPD only: If set TRUE, the display string will only be sent to the FPD device for
		display.
0	1	Undefined.
0	2	Undefined.
0	3	Undefined.
0	4	Undefined.
0	5	Undefined.
0	6	Undefined.
0	7	Undefined.
Display String:
Data Type:		Null(0x00) terminated ASCII character string.
Max Length:		40 Characters.
7.3.35.3	DC-2/MC-1 Response

34 of 44