ABC Office MC-1, DC-2 manual Set Front/Back Balance, Set Active Effect by Id, Packet Description

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

If a value is passed that exceeds the maximum value of that parameter the DC-2/MC-1 will ignore the command and transmit a DC_NAK command with an error code DC_INVALID_DATA.

7.3.20 Set Front/Back Balance

Commands DC-2/MC-1 to set the front/back balance to the value in this packet.

7.3.20.1 Packet Description

Application Header:
Command	DC_CMD_SET_FRONT_BACK_BALANCE	0x23
Data Count	1	0x01
Application Data:
Data[0]	Value	nn

7.3.20.2 Data Description

Value:
Data Type:	Unsigned 8 bit integer.
Max:	32
Conversion:	0 = Front
	32 = Back

7.3.20.3 DC-2/MC-1 Response

The DC-2/MC-1 will assign the value from the packet to the front/back balance.

7.3.20.4 Data Validation

If a value is passed that exceeds the maximum value of that parameter the DC-2/MC-1 will ignore the command and transmit a NAK command with an error code DC_ERR_INVALID_DATA.

7.3.21 Set Active Effect by Id

Commands DC-2/MC-1 to set the active effect to the value in this packet.

7.3.21.1 Command Packet Description

Application Header:

Command	DC_CMD_SET_EFFECT	0x24
Data Count	1	0x01
Application Data:
Data[0]	EffectId	nn

7.3.21.2 Data Description

EffectId:
Data Type:	Unsigned 8 bit integer
Max:	Set by the Effect Count in the “Unit Configuration Packet”.

7.3.21.3 DC-2/MC-1 Response

The DC-2/MC-1 will load the desired effect.

7.3.21.4 Data Validation

If a value is passed that exceeds the maximum value of that parameter the DC-2/MC-1 will ignore the command and transmit a NAK command with an error code DC_ERR_INVALID_DATA.

26 of 44