ABC Office manual Get DC-2/MC-1 Unit Configuration, 3.3 DC-2/MC-1 Response, Data Validation

Lexicon, Inc.
DC-2/MC-1 Serial Communications Protocol	Printed on: 10/19/00

7.3.3.3 DC-2/MC-1 Response

The KeyCode is processed as a valid IR code. No acknowledgment will be sent from DC-2/MC-1.

7.3.3.4 Data Validation

The KeyCode data will be verified as a legal IR code. If the Code is not valid the DC-2/MC-1 will not respond.

7.3.4 Get DC-2/MC-1 Unit Configuration

Request to DC-2/MC-1 for it’s current unit configuration. DC-2/MC-1 will respond with “Unit Configuration Packet”. The HOST should use this information to determine if any information saved by the HOST is current.

7.3.4.1 Command Packet Description

Application Header:

Command	DC_CMD_GET_CONFIG	0x15
Data Count	0	0x00
Application Data:
	N/A

7.3.4.2 DC-2/MC-1 Unit Configuration Response Packet

Application Header:

Command	DC_RESP_UNIT_CONFIG	0x80
Data Count	25	0x19
Application	Data:
Data[0]	ProductId	nn
Data[1]	Software Type	nn
Data[2]	Software Level	nn
Data[3]	Software Major Revision	nn
Data[4]	Software Minor Revision	nn
Data[5]	Protocol Major Revision	nn
Data[6]	Protocol Minor Revision	nn
Data[7]	Total Number of System Parameters	nn
Data[8]	Total Number of Effects	nn
Data[9]	TimeStamp[0]	ch
Data[10]	TimeStamp[1]	ch
Data[11]	TimeStamp[2]	ch
Data[12]	TimeStamp[3]	ch
Data[13]	TimeStamp[4]	ch
Data[14]	TimeStamp[5]	ch
Data[15]	TimeStamp[6]	ch
Data[16]	TimeStamp[7]	ch
Data[17]	TimeStamp[8]	ch
Data[18]	TimeStamp[9]	ch
Data[19]	TimeStamp[10]	ch
Data[20]	TimeStamp[11]	ch
Data[21]	TimeStamp[12]	ch
Data[22]	TimeStamp[13]	ch
Data[23]	TimeStamp[14]	ch
Data[24]	TimeStamp[15]	0x00

12 of 44