4. After confirming the housing direction, push the housing up, then tighten 2 safety screws.
Safety screw
Align the hole positions.
Top cover
Safety screw
Housing
5.Using the 3 supplied camera mounting screws M5 x 12, attach the housing unit to pipe. Tighten 3 screws equally and ensure that no parts rattle.
Note: In this event, tighten screws while pressing the housing against the pipe.
Figure viewed from the top.
Camera mounting screw |
|
Safety screw | Camera |
| mounting screw |
Camera mounting screw
M5 x 12 (with washer and spring washer) (supplied with the
Camera | Safety screw | |
mounting screw | ||
|
Housing
21