TOA Electronics C-CC714 NT installation manual Pole Mounting Bracket Installation

8.5. Pole Mounting Bracket Installation

The optional C-BC711PM Pole Mounting Bracket, C-BC711W Wall Mounting Bracket and YS-60B Mounting Band are required to mount the camera on a pole.

Note

Those mounting brackets and band can be installed on a pole having a mounting pipe diameter of 90 - 340 mm. Be sure to use 2 mounting bands. If mounting band is too long, cut it.

1. Insert the optional mounting bands into the pole mounting bracket’s slots, then attach the band to a pole.

YS-60B Mounting Band (optional)

C-BC711PM (optional)

Hexagon head bolt (M8, M10 or W 3/8)

2. Attach the wall mounting bracket to the pole mounting bracket.

Note: Bolts, nuts and washers for fixing are not supplied with the bracket.

Nut

Spring washer

Plain washer	C-CB711W
	Wall Mounting Bracket
	(optional)
	YS-60B
	Mounting Band
	(optional)
	Hexagon head bolt
	(M8, M10 or W 3/8)

3.For installation procedures of the housing, camera unit and the dome cover, refer to p.20 as the procedures are the same as that of wall mounting.

27