Atw/ Awb

Model		C-CC714 NT	C-CC714 PL
Power Source		24 V AC, 50/ 60 Hz (2P loose end)
Power Consumption		10 W (normal operation), 80 W max.
Control system		RS-485 communications system (new protocol compatible)
Video Output		VBS 1.0 V(p-p), 75 Ω, BNC-R jack
Camera Control Terminal		RS-485 camera control connector, multi-pair cable 8P loose end (3P out of 8P)
Alarm Input		3-channels, no-voltage make contact input, open voltage: 18 V DC,
		short-circuit current: under 2 mA(settable alarm action), multi-pair cable 8P
		loose end (3P out of 8P)*1
Auxiliary Contact Output		1 channel, open collector output, withstand voltage: 30 V DC,
		permissible current: under 100 mA, multi-cable 8P loose end (3P out of 8P)
Synchronization		Internal synchronization/ power synchronization (phase adjustable when in
		power synchronization mode)*2
ID		each 8 alphanumeric character,
		camera/ position/ trace/ auto-panning/ tour/ home/ sector/ AUX
No. of Preset Positions		255 positions
Automatic operation		Auto-panning, Preset Sequence, Trace (2 patterns (60 sec.) possible to
		memorize), Tour (possible to memorize 16 patterns)
Timer		Refresh: Start at the preset time every day or every week by timer settings
		Program: Settable 16 actions
Camera
	Image Device	1/4 type CCD
	Resolution Horizontal	Horizontal: 480 lines (at center)
	S/N Ratio	50 dB
	Minimum Illumination	High-sensitivity function OFF: 1 lx (50IRE), 0.3 lx (20IRE)
		High-sensitivity function ON: 0.03 lx (50IRE), 0.01 lx (20IRE)
	Backlight Compensation	pattern 1/ pattern 2/ pattern 3/ OFF
	High-Sensitivity Function	Slow shutter mode (32 times max.)
	White Balance	ATW/ AWB
	Flicker Reduction	Automatic correction
	Electronic Zooming	12 x zooming
	Auto-Focus	One push/stop AF/continuous
Lens
	Zooming	22 x
	Effective Focal Length	f = 4.0 – 88 mm (22 times)
	Effective Horizontal	Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)
	View Angle
	Maximum Aperture	F 1.6 (W) – 3.8 (T)
	Zooming Speed	WIDE end to TELE end
		Approx. 1.3 s (preset operation), Approx. 2.4 s (manual operation)
Pan/Tilt Head
	Rotating Range	Panning: endless 360° rotation, Tilting: +5° to –90°
	Rotating Speed	Panning/ Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Other Functions		Manual limit
Operating Temperature		–40 to 50°C
Operating Humidity		Under 90% (no due condensation produced)
Applicable Place		Indoors/ outdoors (avoid installing the unit on shore, in industrial area or in
		locations exposed to corrosive gas, fine particles or unexpected strong wind.)
Dustproof/Waterproof		IP66
Capability
Finish		Case/ Top cover/ Decorative frame: PC resin, light gray
		Sunshade: Aluminum, light gray, paint
		Dome cover: PC resin (transparent)
Dimensions		Camera section external diameter: ø230 x 330.5 (H) mm
		Dome external diameter: ø150 mm
Weight		4.4 kg

*1 Either internal synchronization or power synchronization is selected when operated by the RS-485 communications control.

Note: The design and specifications are subject to change without notice for improvement.