TOA Electronics C-CC714 NT installation manual When the Unit is in Use

Page 4

When Installing the Unit

Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded, eventually causing the unit to fall off, which could result in personal injury.

Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury.

Avoid installing the unit at heights exceeding 16 meters above the ground since the unit could be exposed to unexpected strong winds that might cause it to fall or result in other accidents.

When the Unit is in Use

If any of the following irregularities occurs, immediately unplug the power plug from the AC outlet and inform the shop from where the unit was purchased. Further using the unit may result in fire or electric shock.

·If you detect smoke or a strange smell coming from the unit.

·If water or any metallic object gets into the unit

·If the unit falls, or the unit case breaks

·If the power supply cord is damaged (exposure of the core, disconnection, etc.)

·If no camera images are displayed on the monitor TV when the temperature of the camera unit is 0°C or more.

To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage components inside the unit. Refer all servicing to your nearest TOA dealer.

Do not insert nor drop metallic objects or flammable materials in the ventilation slots of the unit’s cover, as this may result in fire or electric shock.

Do not touch a power cable during thunder and lightning, as this may result in electric shock.

CAUTION

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

When Installing the Unit

To avoid electric shocks, be sure to switch off the power before power supply wiring work. Failure to do so may result in electrical shock.

Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills. If the unit falls, this could cause personal injures.

When the Unit is in Use

Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in personal injury and/or property damage.

Switch off the power, and unplug the power supply plug form the AC outlet for safety purposes when cleaning or leaving the unit unused for 10 days or more.

Doing otherwise may cause a fire or electric shock.

Have the unit checked periodically by the shop from where it was purchased. Failure to do so may result in corrosion or damage to the unit or its mounting brackets that could cause the unit to fall, possibly causing personal injury.

Contact your TOA dealer as to the cleaning. If dust is allowed to accumulate in the unit over a long period of time, a fire or damage to the unit may result.

4

Image 4
Contents Installation Manual Table of Contents Safety Symbol and Message Conventions Safety PrecautionsWhen Installing the Unit When the Unit is in Use Features General DescriptionHandling Precautions Modifications Housing Bottom Camera Unit Top NomenclatureCOM LED Precautions When Installing the Camera ConnectionsCamera Settings Camera Control Connector Connection RS-485About Alarm Input About AUX OutputDip Switch Settings Camera Address Setting Switch DIP Switch 1 NoCommunication Speed Setting Switch DIP switch 2 No OSD Switch DIP switch 2 NoCommunication Method Selector Switch DIP switch 2 No Termination Switch DIP switch 2 NoCamera address setting switch 1 Camera address setting switch 65 Camera address setting switch 129 Camera address setting switch 193 About Installation InstallationInstallation Method Wall Mounting Bracket Installation Attaching Housing and Camera Unit to Wall Mounting Bracket Figure viewed from the top Hexagon socket screw M4 x 8 supplied with Mark Duct Page Hang Hexagon head Pole Mounting Bracket Installation Suspension Bracket Installation System Examples RS-485 Communications line controlSpecifications ATW/ AWBATW/ AWB Accessories Optional Products