Vivotek PT71373GPP/ISMA manual

Page 12

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

For the series number in the “Serial Number” field, please check the label on the bottom of the camera.

The IP addresses shown in the "Current IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the Network Camera will be assigned to this IP address, and its subnet mask would be 255.255.255.0. If none of the addresses is free, the Network Camera will try the range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the “Activity” status LED blinks.

The UPnP function will always assign an IP address for the Network Camera. The Administrator can click on button “Link to selected device” to connect the I.E. to the camera.

If the camera is not on the IP installer list, click on the “Search” button to search for the camera on the LAN.

- 11 -

www.vivotek.com

11 - User's Manual

Image 12

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationTo install in Ethernet Software Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsStop Pan speed Tilt speedPan PatrolClient settings Page Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPThis value from 1025 to Motion detection Application settings SnapshotWeekly schedule Snapshot file name prefixSend out the snapshot while motion detection Sequential operationPage Video Clip Page System log Viewing system parameters Maintenance CalibrateTroubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Set server parameter values ReturnWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0Than 40 characters Group Wireless restart Default554 55580000000000 00000000Group IPFilter 0.0256 176x144 for mobile640x480 For Computer512000 For 60Hz onlyAAC4 for computer Gamr for mobile12200 Tilt speed To take effect Camera Control Script.vssxIP address 514Recall SyntaxApplication page CGI command Page Prefixappindex MaxsizeCapture single snapshot Account managementSystem logs Privilege=confConfiguration file Upgrade firmware Post dataTechnical specifications NetworkingTechnology License Notice Electromagnetic Compatibility EMC Liability