Vivotek PT71373GPP/ISMA manual Build a security application

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Build a security application

The Administrator can use the built-in motion detection to monitor any movement to perform many useful security applications. To upload the snapshots, users can choose either email or FTP according to user’s needs. Both e-mail and FTP use the network settings on the Email and FTP page. Refer to the definition section for detail configuration.

1.Click on “Configuration” on homepage,

2.Click on “Motion detection” at the left column,

3.Check “Enable motion detection”,

4.Click on new to have a new window to monitor video,

5.Type in a name to identify the new window,

6.Use the mouse to click, hold, and drag the window corner to resize or the title bar to move,

7.Fine-tune using the “Sensitivity” and “Percentage” fields to best suit the camera’s environment. Higher ”Sensitivity” detects the slighter motion. Higher “Percentage” discriminates smaller objects,

8.Clicking on “Save” enables the activity display. Green means the motion in the window is under the watermark set by Administrator and red means it is over the watermark,

9.Click on “Application” at the left column,

10.Check the weekdays as you need and give the time interval to monitor the motion detection every day,

11.Select the Trigger on Motion detection.

12.Set the delay before detecting next motion to avoid continuous false alarms following the original event,

13.Set the number of pre-event and post-event images to be uploaded, 14.Check the window name set in step 5,

15.Check the way to upload snapshot, Click on save to validate.

- 27 -

www.vivotek.com

27 - User's Manual