Vivotek PT71373GPP/ISMA manual Troubleshooting, Status LED, Reset and restore

Page 58

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Appendix

A. Troubleshooting

Status LED

The following table lists the LED patterns in general.

Condition	LED color

Loading system after power on	Steady red

During booting procedure	Steady green, blue and red

Detecting and setting network	Steady green and blue. Blink red till IP
	address is confirmed

After network is setup (system up)	Blink green every second and steady red

During the upgrade firmware process	Blink green every second and fast blink red

Enable audio	Steady blue. Disable audio will turn off blue
	LED.

Reset and restore

There is a button in the back side of the Network Camera. It is used to reset the system or restore the factory default settings.

RESET: Click on the button.

RESTORE:

1.Press on the button continuously.

2.Wait for all LED blink fast.

3.Free the button.

-57 -

www.vivotek.com

57 - User's Manual

Image 58

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationTo install in Ethernet Software Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsStop Pan Pan speedTilt speed PatrolClient settings Page Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPThis value from 1025 to Motion detection Application settings SnapshotSend out the snapshot while motion detection Weekly scheduleSnapshot file name prefix Sequential operationPage Video Clip Page System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Set server parameter values ReturnWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0Than 40 characters 554 Group Wireless restartDefault 5558Group IPFilter 000000000000000000 0.0640x480 For 256176x144 for mobile Computer512000 For 60Hz onlyGamr for mobile AAC4 for computer12200 Tilt speed To take effect IP address Camera ControlScript.vssx 514Recall SyntaxApplication page CGI command Page Prefixappindex MaxsizeCapture single snapshot Account managementSystem logs Privilege=confConfiguration file Upgrade firmware Post dataTechnical specifications NetworkingTechnology License Notice Electromagnetic Compatibility EMC Liability