Vivotek PT71373GPP/ISMA manual System parameters

Page 31

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

System parameters

"Host name" The text displays the title at the top of the main page.

“Turn off the LED indicator” Check this option to shut off the LED on the rear. It can prevent the camera’s operation being noticed.

"Daylight Saving Time" Click on this to reserve the daylight saving time of the Network Camera.

"Time zone" Adjust the time with that of the time-servers for local settings.

"Keep current date and time" Click on this to reserve the current date and time of the Network Camera. An internal real-time clock maintains the date and time even when the power of the system is turned off.

"Sync with computer time" Synchronizes the date and time of the Network Camera with the local computer. The read-only date and time of the PC is displayed as updated. “Manual” Adjust the date and time according to what is entered by the Administrator. Notice the format in the related fields while doing the entry.

“Automatic” Synchronize with the NTP server over the Internet whenever the Network Camera starts up. It will fail if the assigned time-server cannot be reached. “NTP server” Assign the IP address or domain name of the time-server. Leaving the text box blank connects the Network Camera to the default time-servers.

“Update interval” Select hourly, daily, weekly, or monthly update with the time on the NTP server.

Remember to click on to immediately validate the changes. Otherwise, the correct time will not be synchronized.

- 30 -

www.vivotek.com

User's Manual - 30

Image 31

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationTo install in Ethernet Software Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityClient Settings ConfigurationStop Patrol Pan speedTilt speed PanClient settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPThis value from 1025 to Motion detection Snapshot Application settingsSequential operation Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionPage Video Clip Page System log Viewing system parameters Calibrate MaintenanceReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Return Set server parameter valuesWhere parameter pair is parameter=value\r\n Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security255.255.255.0 192.168.0.99Than 40 characters 5558 Group Wireless restartDefault 5540.0 000000000000000000 Group IPFilterComputer 256176x144 for mobile 640x480 ForFor 60Hz only 512000Gamr for mobile AAC4 for computer12200 Tilt speed To take effect 514 Camera ControlScript.vssx IP addressSyntax RecallApplication page CGI command Page Maxsize PrefixappindexAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Post data Upgrade firmwareNetworking Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC