Vivotek PT71373GPP/ISMA manual System log

Page 55

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

System log

The Network camera support log the system messages on remote server. The protocol is compliant to RFC 3164. If you have external Linux server with syslogd service, use “-r” option to turn on the facility for receiving log from remote machine. Or you can use some software on Windows which is compliant to RFC 3164.

Check “Enable remote log” and input the “IP address” and “port” number of the log server to enable the remote log facility.

In the “Current log”, it displays the current system log file. The content of the log provides useful information about configuration and connection after system boot- up.

- 54 -

www.vivotek.com

User's Manual - 54

Image 55

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationTo install in Ethernet Software Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityClient Settings ConfigurationStop Patrol Pan speedTilt speed PanClient settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Get IP address automatically & Use fixed IP address Network settingsNetwork type LAN & PPPoERtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video orientation Video SettingsAudio and Video GeneralAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPThis value from 1025 to Motion detection Snapshot Application settingsSequential operation Weekly scheduleSnapshot file name prefix Send out the snapshot while motion detectionPage Video Clip Page System log Viewing system parameters Calibrate MaintenanceReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Return Set server parameter valuesWhere parameter pair is parameter=value\r\n Yyyy/mm/dd WirelessNetwork CameraSkip to invoke default server Available parameters on the serverBlank Group Security255.255.255.0 192.168.0.99Than 40 characters 5558 Group Wireless restartDefault 5540.0 000000000000000000 Group IPFilterComputer 256176x144 for mobile 640x480 ForFor 60Hz only 512000Gamr for mobile AAC4 for computer12200 Tilt speed To take effect 514 Camera ControlScript.vssx IP addressSyntax RecallApplication page CGI command Page Maxsize PrefixappindexAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Post data Upgrade firmwareNetworking Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC