Vivotek PT71373GPP/ISMA manual Access List

Page 41

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Access List

The access list is to control the access permission of clients by checking the client IP address.

There are two lists for permission control: Allow List and Deny List. Only those clients whose IP address is in the Allow List and not in the Deny List can connect to the Video Server or Network Camera for receiving the audio/video streaming.

Both Allow List and Deny List consist of a list of IP ranges. If you want to add a new IP address range, type the Start IP Address and End IP Address in the text boxes and click on the Add button. If you want to remove an existing IP address range, just select from the pull-down menu and click on the Delete button.

Both the Allow List and Deny List can have 20 entries.

<url> http://<Network Camera>/setup/accesslist.html

<Network Camera> is the domain name or original IP address of the Network Camera.

- 40 -

www.vivotek.com

User's Manual - 40

Image 41

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationTo install in Ethernet Software Installation Page Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityClient Settings ConfigurationStop Tilt speed Pan speedPan PatrolClient settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPThis value from 1025 to Motion detection Snapshot Application settingsSnapshot file name prefix Weekly scheduleSend out the snapshot while motion detection Sequential operationPage Video Clip Page System log Viewing system parameters Calibrate MaintenanceStatus LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Return Set server parameter valuesWhere parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group Security255.255.255.0 192.168.0.99Than 40 characters Default Group Wireless restart554 555800000000 0000000000Group IPFilter 0.0176x144 for mobile 256640x480 For ComputerFor 60Hz only 51200012200 AAC4 for computerGamr for mobile Tilt speed To take effect Script.vssx Camera ControlIP address 514Syntax RecallApplication page CGI command Page Maxsize PrefixappindexAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Post data Upgrade firmwareNetworking Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC