Vivotek PT71373GPP/ISMA manual Installation, Hardware installation

Page 8

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera.

Hardware installation

Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length.

Connect the power adapter jack to the Network Camera before plugging in to the power socket. This will reduce the risk of accidental electric shock.

Upon powering up, the front red LED will become lighted first and then the device will go through booting process. During the booting process, red, blue and green LEDs will be on. After booted, the Network Camera will standby for getting IP address. After getting IP Address, the green LED will blink every second.

The Network Camera will first detect Ethernet. If it does not connect to Ethernet, the Network Camera will try WLAN. During the searching and connecting process to the wireless access point or station, the red LED of the Network Camera will flash every second. Until the Network Camera connects to the other wireless device, the red LED

- User's Manual

Image 8

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationTo install in Ethernet Software Installation Page Page Page Add Password to Prevent Unauthorized Access Initial Access to the Network CameraCheck Network Settings How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsStop Pan speed Tilt speedPan PatrolClient settings Page Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network settings Network typeLAN & PPPoE Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Video Settings Audio and VideoGeneral Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPThis value from 1025 to Motion detection Application settings SnapshotWeekly schedule Snapshot file name prefixSend out the snapshot while motion detection Sequential operationPage Video Clip Page System log Viewing system parameters Maintenance CalibrateStatus LED TroubleshootingReset and restore Method GET/POST URL commands of the Network CameraGet server parameter values Set server parameter values ReturnWhere parameter pair is parameter=value\r\n WirelessNetwork Camera Skip to invoke default serverAvailable parameters on the server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0Than 40 characters Group Wireless restart Default554 55580000000000 00000000Group IPFilter 0.0256 176x144 for mobile640x480 For Computer512000 For 60Hz only12200 AAC4 for computerGamr for mobile Tilt speed To take effect Camera Control Script.vssxIP address 514Recall SyntaxApplication page CGI command Page Prefixappindex MaxsizeCapture single snapshot Account managementSystem logs Privilege=confConfiguration file Upgrade firmware Post dataTechnical specifications NetworkingTechnology License Notice Electromagnetic Compatibility EMC Liability