Vivotek PT71373GPP/ISMA manual Camera Control, Camera control area

Page 45

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Camera Control

Camera control area

Preset function area

On the Camera Control page, there are two main function control areas:

Camera control area

The pan and tilt functions can be controlled with these buttons. The “Left” button aims the camera to the left; the “Right”, “Up”, and “Down” buttons aim the camera accordingly. The “Home” button aims the camera to the center.

“Pan speed” This controls the range of the horizontal movement of the camera. The greater the value, the greater angular movement when performing the “Left” or “Right” functions.

User's Manual - 44

Image 45

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Hardware installation InstallationTo install in Ethernet Software Installation Page Page Page Initial Access to the Network Camera Check Network SettingsAdd Password to Prevent Unauthorized Access Authentication How to UseInstalling plug-in Main Screen with Camera View Primary user’s capabilityClient Settings ConfigurationStop Tilt speed Pan speedPan PatrolClient settings Page Url http//Network Camera/client.html Fine-tuning for Best Performance Administrator’s capabilityFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Opening accounts for new users Protect Network Camera by passwordsBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings Network type Network settingsLAN & PPPoE Get IP address automatically & Use fixed IP addressRtsp Streaming HttpPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List Audio and Video Video SettingsGeneral Video orientationAudio settings Image Settings Camera control area Camera ControlPreset function area FTP Email & FTPThis value from 1025 to Motion detection Snapshot Application settingsSnapshot file name prefix Weekly scheduleSend out the snapshot while motion detection Sequential operationPage Video Clip Page System log Viewing system parameters Calibrate MaintenanceTroubleshooting Reset and restoreStatus LED URL commands of the Network Camera Get server parameter valuesMethod GET/POST Return Set server parameter valuesWhere parameter pair is parameter=value\r\n Skip to invoke default server WirelessNetwork CameraAvailable parameters on the server Yyyy/mm/ddBlank Group Security255.255.255.0 192.168.0.99Than 40 characters Default Group Wireless restart554 555800000000 0000000000Group IPFilter 0.0176x144 for mobile 256640x480 For ComputerFor 60Hz only 512000AAC4 for computer Gamr for mobile12200 Tilt speed To take effect Script.vssx Camera ControlIP address 514Syntax RecallApplication page CGI command Page Maxsize PrefixappindexAccount management Capture single snapshotPrivilege=conf System logsConfiguration file Post data Upgrade firmwareNetworking Technical specificationsTechnology License Notice Liability Electromagnetic Compatibility EMC