Vivotek PT71373GPP/ISMA manual

Page 22

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Using multicast protocol can reduce traffic by simultaneously delivering a single stream of information to several clients. Please enable multicast options first from configuration page. And make sure your router support this technology.

The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured.

The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this protocol is that the real-time effect is worse than that with the UDP protocol.

The HTTP protocol allows the media can be streaming through http port when the UDP or TCP protocol are blocked.

If no special need is required, UDP protocol is recommended. Generally speaking, the client’s choice will be in the order of UDP TCP. After the Network Camera is connected successfully, “Protocol Option” will indicate the selected protocol. The selected protocol will be recorded in the user's PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol, save, and return HOME to re-connect.

- 21 -

www.vivotek.com

21 - User's Manual

Image 22

Contents Wireless Pan/Tilt Network Camera PT7137 Before You Use This Product Table of Contents FTP 886-2-82455282 886-2-82455532 Package Contents Installation Hardware installationTo install in Ethernet Software Installation Page Page Page Check Network Settings Initial Access to the Network CameraAdd Password to Prevent Unauthorized Access How to Use AuthenticationInstalling plug-in Primary user’s capability Main Screen with Camera ViewConfiguration Client SettingsStop Pan Pan speedTilt speed PatrolClient settings Page Url http//Network Camera/client.html Administrator’s capability Fine-tuning for Best PerformanceFor Viewing by Mobile Phone Somewhere Between Real-time and Clear Images Protect Network Camera by passwords Opening accounts for new usersBuild a security application Software revision upgrade Definitions in Configuration System parameters Security settings LAN & PPPoE Network settingsNetwork type Get IP address automatically & Use fixed IP addressHttp Rtsp StreamingPage Url http//Network Camera/setup/network.html Wlan Configuration Tkip AES Url http//Network Camera/setup/wireless.html Ddns Access List General Video SettingsAudio and Video Video orientationAudio settings Image Settings Camera Control Camera control areaPreset function area Email & FTP FTPThis value from 1025 to Motion detection Application settings SnapshotSend out the snapshot while motion detection Weekly scheduleSnapshot file name prefix Sequential operationPage Video Clip Page System log Viewing system parameters Maintenance CalibrateReset and restore TroubleshootingStatus LED Get server parameter values URL commands of the Network CameraMethod GET/POST Set server parameter values ReturnWhere parameter pair is parameter=value\r\n Available parameters on the server WirelessNetwork CameraSkip to invoke default server Yyyy/mm/ddGroup Security Blank192.168.0.99 255.255.255.0Than 40 characters 554 Group Wireless restartDefault 5558Group IPFilter 000000000000000000 0.0640x480 For 256176x144 for mobile Computer512000 For 60Hz onlyGamr for mobile AAC4 for computer12200 Tilt speed To take effect IP address Camera ControlScript.vssx 514Recall SyntaxApplication page CGI command Page Prefixappindex MaxsizeCapture single snapshot Account managementSystem logs Privilege=confConfiguration file Upgrade firmware Post dataTechnical specifications NetworkingTechnology License Notice Electromagnetic Compatibility EMC Liability