Rear Panel
Rear Panel
1 | 2 | 3 | 4 | 9 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 | 6 | 7 | 8 | 10 |
1.NTSC/PAL SWITCH - Set the unit to either NTSC (North America) or PAL (Europe).
2.BNC VIDEO INPUTS - Channel 1~4 Camera inputs (used to connect Cameras with BNC connection type). Cameras with BNC connections require an additional power adaptor.
NOTE: Additional BNC Inputs are available on the 8 and 16 channel models.
3.MONITOR OUT - Video Output port to connect the unit to a secondary DVR or TV. Directly reflects the current onscreen images.
4.RCA AUDIO INPUTS - Channel 1~4 Audio inputs (for BNC type cameras with standard RCA Audio output).
5.AUDIO OUT - Audio Output port to connect the unit to a secondary DVR or TV.
6.VGA OUT - Video Output port to connect the unit to a Computer Monitor. Directly reflects the current onscreen images.
7.ALARM BLOCK (INPUT/OUTPUT) &
•External alarm devices such as a motion sensor, door/alarm sensor, or time lapse VCR for Alarm Recording.
•The block is also used to connect Relay and
Please refer to Appendices #4 and #5 for configuration details.
8.PS/2 port: Connection port for a PS/2 mouse (not included).
9.ETHERNET PORT - Located on the back of the unit, above the Alarm Block terminals. Connects the monitor to a router for connection to the internet. Refer to the appendices for Remote Connection setup.
10.DC POWER INPUT - Connect the AC power using the power cord provided with the unit from the monitor to an electrical outlet
3