![](/images/new-backgrounds/1131042/13104279x1.webp)
System Menu
SYSTEM MANAGEMENT
Factory Defaults
The System can be returned to the Factory default settings:
•Select the ‘Factory Defaults’ option by selecting the PRESS button.
•Login with your user ID and password.
•Choose OK to reset the unit, or CANCEL to exit without resetting.
NOTE: If the System is reset to Factory Defaults, all settings will be lost (except the Date and Time).
System Data
The System settings can be saved to a USB flash drive:
•Insert the USB flash drive into the System and select the Save option to save settings:
•A Success message indicates that the backup was completed.
•If the device is not detected, a message will indicate that No storage device was found.
•Insert the USB flash drive into the System and select the Load option to restore settings.
•This is recommended after initial setup and installation is complete.
CONTROL DEVICE
Used with an external control device (not included with the system):
•System ID - Select system ID. (1~254)
•Protocol - Select protocol (from the Device user Manual).
•Baud rate - Setup baud rate (from the Device user Manual).
32