Appendix 12: Recording Modes
Setting Multiple Time Blocks
1.Enter MENU mode by pressing the MENU button on the front panel of the system (or on the Remote Control). Select the RECORD MENU Option.
2.Select the SIMPLE RECORDING MODE menu. Navigate using the up and down arrows on the front panel (or remote control). Navigate using the arrow keys
3.Use the navigation arrows on the remote control to select the Time Grid and press the ENTER button. Once selected, the Time Grid is highlighted in light blue.
4.Use the navigation arrows to select an individual time block. Selected arrows are highlighted in light blue.
5.Press the ENTER button. The selected time block will be highlighted ORANGE. Press the UP, DOWN, LEFT and RIGHT Arrow keys to highlight multiple time blocks.
6.Press ENTER button again to access the Configuration Menu. Select CONTINUOUS, MOTION or ALARM by pressing the UP and DOWN arrows. Press ENTER to check the boxes. Select OK and press the ENTER button to save your settings or select CANCEL to exit without saving.
Add recording events: Continuous (purple), Motion (light blue), Motion (red), or None (grey).
67