Recording Menu Controls
ADVANCED RECORDING
Under Recording Operations, select Advanced and select APPLY to view the Advanced Recording tab.
Use Manual Recording to customize recording size, FPS, image quality, and audio for each camera. You can also set Manual (Panic) Recording Time.
Setting
Edit parameters for each camera using the Time Interval Bar.
Using the Time Interval Bar
Parameters for each camera are set by hour using the Time Interval bar.
Press the ENTER key to select the Interval Bar, and navigate using the arrow keys.
Select an Hour and press ENTER again to open the Camera Settings for the selected hour.
Select an Hour (highlighted in Green), and press ENTER again to open the Camera Settings for the selected hour.
•SIZE - Sets the video capture size for each camera to 352x240, 704x240 or 704x480.
Time Interval Bar
Selected Hour
Changed Time Block
• FPS - Sets the Frames Per Second for recording for each channel. Each
channel can be set to 1, 2, 3, 7, 15 or
30 Frames per second (real time video capture) from a shared pool of 240 FPS. This is reflected in the Frame Remaining bar below Panic Recording Time.
•Quality - Sets the video recording quality to Low, Standard, High or Highest.
•Audio - The Audio Recording Settings work differently on the 4 CH and 8/16 CH Models:
•Alarm - Assign an alarm trigger (1~4) for each channel.
Select the APPLY button to save your settings, or select UNDO to cancel without saving.
Note: The changed time block will be displayed in yellow on the Time Interval bar; time block will also be yellow in the Activation menu.
14