![](/images/new-backgrounds/1131042/13104227x1.webp)
Display Modes
Display Modes
Initial Loading Sequence
•Press the POWER button located on the front panel of the DVR to start the unit.
•The DVR will perform a Hard Drive check
•The unit will initially load to a quad
NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be detected by the system.
If you choose to FORMAT a drive in this way, the drive will no longer be readable by a regular PC without using the HARD DRIVE VIEWER software included on the CD provided with this unit.
Individual Camera Display
Each channel displays the Camera Name and
Recording Status:
: Record
: Pre Record
C: Continuous
M: Motion
A: Alarm
6