Digimerge DHU104 instruction manual Appendix 10 Using Listen-In Audio

Page 71

Appendix 10: Using Listen-In Audio

Appendix 10: Using Listen-In Audio

How do I enable Listen-In Audio, and how do I set the Listen-in channel?

Listen-In Audio is the ability to listen to live audio on ONE channel at a time, between channels 1~4. To listen to live audio on a channel:

1.Open the system MENU, select SYSTEM SETUP and press the ENTER button.

2.Select SOUND and press the ENTER button.

3.Under AUDIO, configure the following options:

•Live Audio - Turns Live System Audio (from the Audio on the terminal) to ON/ OFF.

•Audio Monitoring Channel - Select the channel for Listen-in Audio.

•Network Audio TX - Turn network audio transmission ON/OFF.

•Network Audio RX - Turn network audio receiving ON/OFF.

NOTE: Once the LIVE AUDIO Feature has been set to ON, the Remote Control can be used to select the Listen-In Audio Channel. Press the AUDIO SEL button on the Remote Control to switch between Channels 1~4. An Audio Icon will appear onscreen next to the current Live Audio Channel.

63

Image 71

Contents

Digital Video Surveillance Recorder Page Installation Important SafeguardsService General Precautions General PrecautionsDVR Features Table of Contents Event / Sensor Getting Started Remote Control Hardware & SoftwareFront Panel Rear Panel 15. F3 N/A Remote ControlMouse Controls Mouse ControlIndividual Camera Display Display ModesInitial Loading Sequence Display Modes Network Connectivity IndicatorCovert Camera Mode Network IndicatorsPTZ Control Screen Focus Control Screen PTZ Pan/Tilt/Zoom & Focus ControlsSystem Shutoff System Power OffSystem Log Off Key LockVirtual Keyboard Control Active Option IndicatorMenu Navigation Controls & Tips Menu Navigation ControlsNavigation / Playback Playback and Navigation ControlsPanic Recording Record Setup MenuSelect Record Setup Recording Menu ControlsSimple Recording Time Interval Bar Selected Hour Changed Time Block SettingAdvanced Recording Activation Manual Recording Search By Time Search ModeSearch By Event Enter System Setup ControlsOSD Onscreen Display System Setup MenuMonitor Camera Title Camera MenuContrast, Tint and Color for individual Color SetupPTZ Setup Selected Area is shaded in Grey PTZ PropertiesMotion Sensor Buzzer Sound MenuSound User Management Controls for Network Time Server SetupSystem Menu DATE/TIMENetwork Mail Setup ADD User Screen User ManagementSystem Information Screen System ManagementFirmware Update System Data Factory DefaultsControl Device HDD Event Event / SensorAlarm Output Alarm InputBuzzer Output Email Notification Format Erases all Hard Drive data Disk ManagementArchiving Menu ArchivingArchiving Options Error MessagesNetwork Connectivity Overview Finding Your External IP Address IP & MAC AddressNavigate to http//ddns.digimerge.net Setting Up Your Ddns AccountUser Name Domain Name Password Internet Internal Network Router Port ForwardingTCP/IP Port Router ComputerDdns Setup Check TroubleshootingProblem General Specifications Appendix 1 System SpecificationsNetwork Specifications Appendix 1 System Specification cont’dAlarm Specifications Recording SpecificationsLbs DVR SpecificationsAppendix 2 Digimerge Client Software Requirements DVR Appendix 3 Monitor OutGround Appendix 4 Connecting Motion/Alarm DevicesInstalling a Sensor Not IncludedPTZ Camera Not Included Appendix 5 Connecting a PTZ CameraInstalling a PTZ RS-445 Type PTZ Camera BNC Cameras Appendix 6 Full Connectivity DiagramReplacing the Hard Drive Appendix 7 Replacing the Hard DriveFormatting the New Hard Drive Appendix 8 Using the Storage Calculator Navigating within the System Menu Appendix 9 System Setup Tips Make Sure That the Date and Time are SET Prior to Recording Formatting the Hard Drive Camera Setup Backing up your System Configurations Appendix 10 Using Listen-In Audio Appendix 11 Playing Recorded Video Data Search By Event Appendix 12 Recording Modes Setting An Individual Time BlockSetting Multiple Time Blocks What do I need? Appendix 13 Setting Up Remote ViewingIP & MAC Address Setting Up Your Ddns Account User Name Domain Name Password Network Router Port Forwarding Ddns Setup Adding a Group Digimerge NetViewer Software Connection ManagerCamera Assign Set each camera to a portion Adding a Site Individual Unit ConfigurationDigimerge NetViewer Software Remote Connection Limited Warranty Canada Page IT’S ALL on the WEB