![](/images/new-backgrounds/1131042/131042165x1.webp)
Appendix 13: Setting Up Remote Viewing
Adding a Site (Individual Unit Configuration)
DVR Information - Enter the information specific to the unit:
•Name - Enter a name for the unit.
•IP / Domain Name - Enter the IP address or Domain Name for the System. This will vary depending on setup (Internal Network Connection or External Remote access through the Internet).
•Port - Set to 6100 by default.
•User ID - Enter the USER ID to connect to the system (the USER ID is configured on the System - i.e. ADMIN - case sensitive).
•Password - The password used to access the System (i.e. The ADMIN password is set to 1234 by default).
Camera Assign - Set each camera to a portion of the
ADD Button - Adds the site to the Group.
OK Button - Accepts the changes and Closes the configuration Window
75