Digimerge DHU104 instruction manual Appendix 12 Recording Modes, Setting An Individual Time Block

Page 74

Appendix 12: Recording Modes

Appendix 12: Recording Modes

The system is set to automatically start recording when powered on. You may wish to change these settings to better suit your security needs. These settings can be changed for an individual camera on one time block, or can be set for multiple cameras for multiple time blocks.

Setting An Individual Time Block

1.Enter MENU mode by pressing the MENU button on the front panel of the system (or on the Remote Control). Select the RECORD MENU Option.

2.Select the SIMPLE RECORDING MODE menu. Navigate using the up and down arrows on the front panel (or remote control). Navigate using the arrow keys

3.Use the navigation arrows on the remote control to select the Time Grid and press the ENTER button. Once selected, the Time Grid is highlighted in light blue.

4.Use the navigation arrows to select an individual time block. Selected arrows are highlighted in light blue.

5.Press the ENTER button. The selected time block will be highlighted ORANGE.

6.Press ENTER button again to access the Configuration Menu. Select CONTINUOUS, MOTION or ALARM by pressing the UP and DOWN arrows. Press ENTER to check the boxes. Select OK and press the ENTER button to save your settings or select CANCEL to exit without saving.

Add recording events: Continuous (purple), Motion (light blue), Motion (red), or None (grey).

66

Image 74

Contents

Digital Video Surveillance Recorder Page Important Safeguards InstallationService General Precautions General PrecautionsDVR Features Table of Contents Event / Sensor Remote Control Hardware & Software Getting StartedFront Panel Rear Panel Remote Control 15. F3 N/AMouse Control Mouse ControlsIndividual Camera Display Display ModesInitial Loading Sequence Network Indicators Network Connectivity IndicatorCovert Camera Mode Display ModesPTZ Pan/Tilt/Zoom & Focus Controls PTZ Control Screen Focus Control ScreenKey Lock System Power OffSystem Log Off System ShutoffMenu Navigation Controls Active Option IndicatorMenu Navigation Controls & Tips Virtual Keyboard ControlPlayback and Navigation Controls Navigation / PlaybackRecording Menu Controls Record Setup MenuSelect Record Setup Panic RecordingSimple Recording Time Interval Bar Selected Hour Changed Time Block SettingAdvanced Recording Activation Manual Recording Search Mode Search By TimeSearch By Event System Setup Controls EnterSystem Setup Menu OSD Onscreen DisplayMonitor Camera Menu Camera TitleContrast, Tint and Color for individual Color SetupPTZ Setup Selected Area is shaded in Grey PTZ PropertiesMotion Sensor Buzzer Sound MenuSound DATE/TIME Network Time Server SetupSystem Menu User Management Controls forNetwork Mail Setup User Management ADD User ScreenSystem Management System Information ScreenFirmware Update System Data Factory DefaultsControl Device Event / Sensor HDD EventAlarm Input Alarm OutputBuzzer Output Email Notification Disk Management Format Erases all Hard Drive dataArchiving Archiving MenuError Messages Archiving OptionsNetwork Connectivity Overview IP & MAC Address Finding Your External IP AddressSetting Up Your Ddns Account Navigate to http//ddns.digimerge.netUser Name Domain Name Password Router Computer Router Port ForwardingTCP/IP Port Internet Internal NetworkDdns Setup Check TroubleshootingProblem Appendix 1 System Specifications General SpecificationsRecording Specifications Appendix 1 System Specification cont’dAlarm Specifications Network SpecificationsDVR Specifications LbsAppendix 2 Digimerge Client Software Requirements Appendix 3 Monitor Out DVRNot Included Appendix 4 Connecting Motion/Alarm DevicesInstalling a Sensor GroundPTZ Camera Not Included Appendix 5 Connecting a PTZ CameraInstalling a PTZ RS-445 Type PTZ Camera Appendix 6 Full Connectivity Diagram BNC CamerasAppendix 7 Replacing the Hard Drive Replacing the Hard DriveFormatting the New Hard Drive Appendix 8 Using the Storage Calculator Appendix 9 System Setup Tips Navigating within the System MenuMake Sure That the Date and Time are SET Prior to Recording Formatting the Hard Drive Camera Setup Backing up your System Configurations Appendix 10 Using Listen-In Audio Appendix 11 Playing Recorded Video Data Search By Event Setting An Individual Time Block Appendix 12 Recording ModesSetting Multiple Time Blocks Appendix 13 Setting Up Remote Viewing What do I need?IP & MAC Address Setting Up Your Ddns Account User Name Domain Name Password Network Router Port Forwarding Ddns Setup Digimerge NetViewer Software Connection Manager Adding a GroupAdding a Site Individual Unit Configuration Camera Assign Set each camera to a portionDigimerge NetViewer Software Remote Connection Limited Warranty Canada Page IT’S ALL on the WEB