Sony DCR-PC7E operating instructions AC power adaptor, Others, Symptom Corrective actions

Picture

Symptom	Cause and/or corrective actions
While editing using the DV connecting	• Remove the DV connecting cable, and connect it
cable, recording picture cannot be	again.
monitored.

Others

Symptom	Cause and/or corrective actions
The camcorder becomes warm.	• If the power of the cammcorder is on for a long time,
	it becomes warm, which is not mulfunction.
The supplied Remote Commander does	• COMMANDER is set to OFF in the menu system.
not work.	m Set it to VTR4 or ID. (p. 86)
	• Something is blocking the infrared rays.
	m Remove the obstacle.
	• The battery is not inserted with the correct polarity.
	m Insert the battery with the correct polarity. (p. 86)
	• The batteries are dead.
	m Insert new ones. (p. 86)
The CHARGE lamp flashes after you	• The camcorder is not malfunctioning.
charge the battery pack installed in the
camcorder.

Additional information / ÑÓÔÓÎÌËÚÂθ̇fl

No function works though the power is on.

•Disconnect the connection plug on the battery pack or on the AC power adaptor, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the RESET button on the back of the cassette compatment lid using a sharp-pointed object. (If you press the RESET button, all the settings including the date and time return to the default.)

(p. 82)

ËÌÙÓ Ï‡ˆËfl

AC power adaptor

Symptom	Corrective actions
The VTR/CAMERA or CHARGE lamp	• Disconnect the mains lead. After about 1 minute,
does not light.	reconnect the mains lead. (p. 7)
The CHARGE lamp flashes.	• See the chart on the next page.

73

DCR-PC7E.3-858-174-12 (E,R)