Operations (Step 5 Setting Using the Web Browser)
5-4 Setting Using the Web Browser (11. Auto Trace Setting)
Auto Trace Setting window:
<Record Start Confirmation Screen>
[Image Setting] Screen
1Press to display the [Record Start Confirmation Screen].
Memorization of Auto Trace will start
upon clicking and subsequent Pan/Tilt as well as Zoom operations will be stored. (Approximately 30 seconds)
2For manual Pan/Tilt and Zoom operation.
3To end a recording operation, click
.
The following warning message will be displayed upon clicking the button if recording has not started.
Notes
Auto Trace will not be memorized in the following cases. A warning message will appear.
•During Auto Pan operation
•During Auto Patrol operation
•During Auto Trace operation
4For setting image quality.
Upon clicking , the current image will switch to the image quality setting during Auto Trace operation.
The same settings will also be applied during the Auto Pan operation. Use the [Image Setting] screen to adjust image
quality.
Click to display the [Image Setting] screen.