Preparation (Step 1 Connection/Installation)
1-3 Installing the Camera (Continued)
Camera clamping bracket | 4. Turn the camera |
| Make sure that the camera is horizontal, |
| followed by fitting the camera to the ceiling |
| mount and turning it in the clockwise direction |
| until it stops. Upon doing so, check that the |
| the camera clamping bracket is aligned with |
| the position of the locking screw of the ceiling |
| mount. |
| Rotate the |
| camera |
| clockwise. |
Locking Screw |
|
| 5. Fasten the locking screw |
| Fasten the locking screw using a flathead |
| screwdriver. |
| Cautions |
| If the locking screw is not securely fastened, |
| the camera may vibrate or fall down. |
| Be sure to fasten the locking screw firmly. |
Tighten the locking screw. | * To dismantle the camera, perform procedure |
| from steps 1 to 5 in the reverse order. |
22