JVC manual Start up the VN-C655U Setup Tool and select Memory Info, Normal, High Speed

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C655U Setup Tool" (12. Memory Information)

It is possible to check the memory capacity of VN-C655.

1.Start up the "VN-C655U Setup Tool" and select [Memory Info].

1 Check the available memory space. (The built-in memory capacity of this camera is about 8000 KB.)

2-5 Registering Connected Camera Using the "V.Networks Controller"

The connected camera can be registered with the installed "V.Networks Controller".

1.Select [Start] † [Programs] † [V. NETWORKS] † [V.Networks Controller] to start up the "V.Networks Controller".

2.Select [File] and [New].

3.The [New] screen will be displayed.

1 Enter the [IP Address].

Note

In a DHCP environment, enter the IP address that is assigned to this camera by the DHCP server.

2 Enter the [V.Networks Name]. Do so by using a name convenient for subsequent selection, such as the installation location or number. (1 to 40 characters)

3 A folder with the name entered in 2 will be created inside the folder specified here, and recorded files will be stored here.

4 Select the mode for acquiring images.

Normal :

Client will send requests for each image to VN-C655.

Set to Normal when using a narrow bandwidth network.

High Speed:

Images will be automatically sent from VN- C655 at the specified frame rate. A maximum transmission rate of 30 fps is possible for 640 x 480 images.

When sending out images to multiple clients at the same time, however, transmission at a rate of 30 fps for 640 x 480 images will not be possible.

52