JVC VN-C655 Following confirmation screen will be displayed, Authorization Level Allowed Access

2-4 Other Settings Using the "VN-C655U Setup Tool" (1. Password Setting)

PCs (users) connected to this camera are regulated via an access protection function which requires a password entry.

Passwords can be set or canceled using the "VN-C655U Setup Tool".

A different password can be set for each of the 3 authorization levels, namely user, operator and administrator.

Authorization Level	Allowed Access
User	Viewing of motion images only
Operator	All operations using the V.Networks Controller
Administrator	All of the above and all settings using the VN-C655U Setup Tool

Note

Do not forget the passwords as canceling or changing of passwords is not possible unless the current and correct password is entered.

1.Start up the "VN-C655U Setup Tool", followed by selecting [User], [Operator] or [Administrator] under [Password] setting.

1 Enter a password to set password protection or to change a password. Characters entered are displayed as *.

•Enter the same password in both the upper and lower boxes.

•Password must be alphanumeric and not longer than 8 characters.

Note

To cancel the password setting, leave the entry box blank and click OK.

2 Click .

2.The following confirmation screen will be displayed.

Click .

Notes

•For a password-protected VN-C655, a password request screen will be displayed.

•VN-C655 setup will not be possible unless the correct administrator password is entered.

•Security level increases in the order from user to operator to administrator. Password protection will not be valid if a password is assigned only to a lower level but not to a higher one.

31