Introduction
Operating Precautions (continued)
Auto Focus
Although this camera comes with the
Objects for which auto focusing is difficult
¥When brightness of the screen is extremely high (bright)
¥When brightness of the screen is extremely low (dark)
¥When brightness of the screen varies continuously (eg. flashing lights, etc.)
¥When there is poor contrast
¥When vertical stripe patterns recur on the screen
Camera settings for which auto focusing is difficult
¥When the AGC gain level increases and the screen becomes grainy
¥When SENSE UP is activated and the image contains only little motion.
Read Me
Please read through the "Read Me" file in the
How to Use This Manual
Characters and symbols used in this manual
Preset Positions
¥The is a total of 100 preset positions that can be set, including the home position.
¥The TILT position can be set and operated only between 0¡ to 90¡ even when the item ÒFLIPÓ is set to ON.
Image sending may be affected when this is done on a network where multicast transmission devices are connected, or on networks for which there is transmission of voluminous broadcast data. When this occurs, ensure to employ a system design that separates the camera from other multicast or broadcast devices by making use of a switching valve or VLAN with a multicast control function.
Warning
Install at places that are strong enough to support the camera weight.
Install this camera at places that are strong enough to support its weight upon taking into consideration the vibration force during
Caution Points to pay attention to during operation.
Note Details for reference, such as functions or constraints during use.
☞Pages or items to refer to.
* JVC shall not be held liable for any loss or damage to the customer or any claim from a third party arising from the use of this software.
Specifications of this software are subject to alteration for improvement without prior notice. All product names that appear in this document are the trademarks or registered trademarks of their respective companies. Marks and symbols such as ª,¨ and © do not appear in this document.
8