Agc, @ Manual Focus Level, # Iris Mode, AveragePeak

1Zoom

This function sets maximum zoom ratio of the electronic zooming.

(Set value: x1, x2, x4, x6, x8, x10)

2Focus

For selecting the mode of focus.

Easy Auto Focus : Focus will be adjusted automatically

upon performing Pan/Tilt or Zoom operations on the camera.

Manual : Adjust focus manually.

3Color Level

Adjusts the color level of video signals. (Set value: -5 to 5)

4Enhance Level

Sets the contour enhancement which controls the sharpness on the monitor screen. (Set value: -5 to 5)

5V. sharpness

This function sets sharpness in the vertical direction of the image.

(Set value: Normal, High)

6Pedestal Level

Sets the pedestal level (black level) of video signals.

(Set value: -5 to 5)

7Auto Black Control

Use this function when darker parts of a picture are unclear even after the gain has been increased using the AGC (Auto Gain Control). (Set value: ON, OFF)

8AGC:

Sets the maximum gain of the AGC (Auto Gain Control), which electronically increases the gain when the object is under low light conditions.

(Set value: OFF, 10 dB, 20 dB)

9Sense Up

This function is used to increase the sensitivity by extending the exposure time. Increasing this value slows the shutter speed and motion may appear unnatural.

(Set value: OFF, x2, x4, x8, x16, x24, x32)

0ALC Priority

When an object is dark, this function sets whether priority during monitoring is placed on maintaining the motion of the camera or on picture quality.

(Set value: Motion, Picture)

!Shutter

Sets the speed of the shutter.

(Set value : 1/60, 1/100, 1/250, 1/500, 1/ 1000, 1/2000, 1/4000, 1/10000)

@Manual Focus Level

For adjusting focus when [Focus] in 1 is set to "Manual". Focus will be set on a nearer object when the value decreases, and on a distant object when the value increases.

(Set Value: 0 to 100)

Click the [One-push AF] button to enable automatic focus.

#Iris Mode

For performing setting related to lens iris adjustment.

Auto : Adjusts iris automatically to the default state.

Manual : Adjust iris manually.

Auto+ : Adjusts iris automatically to a level brighter than the default state.

Auto- : Adjusts iris automatically to a level darker than the default state.

$White Balance

For setting the white balance, which provides a color standard.

ATW : Adjusts the white balance automatically according to the color temperature of the lighting.

AWC : Adjusts the white balance automatically. R-B : Adjusts the phases of R (Red) and B (Blue) under AWC mode.

Mg-G : Adjusts the phases of M (Magenta) and G (Green) under AWC mode.

%Average:Peak

Sets the method of exposure detection according to ratio between the average and peak values.

(Set value: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5)