Preparation (Step 1 Connection/Installation)
1-1 Connecting Cables
Cautions
●Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the embedded cover (recess bracket) is securely attached before installing the camera.
●Ensure to attach the cover for the ceiling mount. Installation is not possible without attaching the cover. In addition, the cover also prevents penetration of foreign objects into the ceiling mount. Penetration of foreign objects may cause a malfunction or, in the worst scenario, cause smoking or fire.
1.Making the hole
Make a hole for passing the connection cables through the inner side of the ceiling.
Make a 90 mm (3.5 inches) diameter hole in the ceiling.
Diameter 90 mm | (☞Page 115) |
|
2. Connect the cables
Connect the cables to the terminals on the Ceiling Mount.
Lan cable
Alarm signal cable
Coaxial cable
Converter Unit
The connection cables include Alarm Signal cable, LAN cable, coaxial cable and Converter Unit.
1.LAN cable (☞Page 16) Connect to the hub or PC.
2.Alarm Signal cable (☞Page 15) Connect to devices with an alarm output terminal.
3.Coaxial cable (☞Page 17) Connect to the monitor, etc.
4.Converter Unit (☞Page 18) Connect to AC 24 V power supply.
14