JVC GR-DVP10 manual Shuttle Search, Blank Search, Playback Zoom, Slow-Motion Playback

EN 21

Shuttle Search									7 Press + or – to select
										“EXECUTE”, and
Allows high-speed search in either direction during
										press SET/SELECT.
video playback.										● The “BLANK	BLANK SEARCH
											PUSH "STOP" BUTTON
1) During playback, turn the SHUTTLE SEARCH										SEARCH”	TO CANCEL
Ring to the right (5) for forward search, or to										indication appears
the left (3) for reverse search.										and the camcorder
2) To resume normal playback, press 4/9.										automatically starts
● During playback, turn the SHUTTLE SEARCH										reverse or forward search, then stops at the
Ring to the right (5) or to the left (3) and										spot which is about 3 seconds of tape before
hold it. The search continues as long as you										the beginning of the detected blank portion.
hold the ring. Once you release the ring,											8
normal playback resumes.										● To cancel Blank Search midway, press .
									NOTES:
● A slight mosaic effect appears on the display
									● In step 7, if the current position is at a blank
during Shuttle Search. This is not a
										portion, the camcorder searches in the reverse
malfunction.
										direction. If the current position is at a recorded
ATTENTION:
										portion, the camcorder searches in the forward
During Shuttle Search, parts of										direction.
the picture may not be clearly									● Blank Search does not work if “HEAD CLEANING
visible, particularly on the left										REQUIRED. USE CLEANING CASSETTE” has
side of the screen.										appeared with the tape.
Blank Search									● If the beginning or end of the tape is reached
										during Blank Search, the camcorder stops
										automatically.
Helps you find where you should start recording in
									● A blank portion which is shorter than 5 seconds of
the middle of a tape to avoid time code interruption.										tape may not be detected.
( pg. 19)									● The detected blank portion may be located
1 Load a cassette. ( pg. 15)										between recorded scenes. Before you start
2 Set the VIDEO/MEMORY Switch to “VIDEO”.										recording, make sure there is no recorded scene
										after the blank portion.
3 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.									Slow-Motion Playback
4 Press MENU. The
			V I DEO						Frame-By-Frame Playback
Menu Screen appears.	SOUND MODE –				STEREO
		1 2 b i t MODE –			SOUND			1	Playback Zoom
5 Press + or – to select	SYNCHRO			–	± 0 . 0
	REC MODE			–
“t”, and press SET/			COPY –			OFF			Playback Special Effects
	NAV I . DEL .
SELECT. The VIDEO
	BLANK SRCH
									Available only with the remote control (provided).
Menu appears.	S / AV I NPUT			–		OFF
6 Press + or – to select	RETURN								( pg. 55)
			V I DEO
“BLANK SRCH”, and	SOUND MODE –				STEREO
		1 2 b i t MODE –			SOUND			1
press SET/SELECT.	SYNCHRO			–	± 0 . 0
The Sub Menu	REC MODE			–
			COPY –OF				F
appears.	NAV I . DEL				EXECUTE
	BLANK SRCH
	S / AV I NPUT			–	RETURN

RETURN

VIDEO RECORDING & PLAYBACK