JVC GR-DVP10 manual 66 EN, VIDEO/MEMORY Switch is Set the VIDEO/MEMORY

66 EN				TROUBLESHOOTING (cont.)
	7.	The LCD monitor or	7.	• Certain Wipe/Fader effects,	7.	• Re-read the sections covering
		viewfinder indications blink.		certain modes of Program AE		Wipe/Fader effects, Program
				with special effects, “DIS”		AE with special effects and
				and other functions that		“DIS”. ( pg. 31 – 34, 36)
				cannot be used together are
				selected at the same time.
	8.	Digital Zoom does not work.	8.	• 10X optical zoom is selected.	8.	• Set “ZOOM” to “40X” or
				• The VIDEO/MEMORY		“200X”. ( pg. 35)
				Switch is set to “MEMORY”.		• Set the VIDEO/MEMORY
						Switch to “VIDEO”.
Video and D.S.C. Playback
		SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
	9.	Play, Rewind and Fast-Forward	9.	• The Power Switch is set to	9.	• Set the Power Switch to
		functions do not work.		“A” or “M”.		“P”. ( pg. 20)
				• VIDEO/MEMORY Switch is		• Set the VIDEO/MEMORY
				set to “MEMORY”.		Switch to “VIDEO”.
	10.	The tape is moving, but there is	10.	• Your TV has AV input	10.	• Set the TV to the mode or
		no picture.		terminals, but is not set to its		channel appropriate for
				VIDEO mode.		video playback. ( pg. 22)
				• The cassette holder cover is		• Close the cassette holder
				open.		cover. ( pg. 15)
	11.	Blocks of noise appear during	11.		11.	• Clean the video heads with
		playback, or there is no		—		an optional cleaning
		playback picture and the				cassette. ( pg. 73)
		screen becomes blue.
	12.	A memory card cannot be	12.	• The Power Switch is set to	12.	• Set the Power Switch to
		played back.		“A” or “M”.		“P”. ( pg. 24)
				• The VIDEO/MEMORY		• Set the VIDEO/MEMORY
				Switch is set to “VIDEO”.		Switch to “MEMORY”.