JVC GR-DVP10 manual 52 EN, Equipped With a DV OUT, When connecting the cable, open the cover

Page 52

10 Press START/STOP on the remote control to start recording.

● The indication rotates.

11 Press START/STOP on the remote control again to engage the Record-Pause mode.

● The indication stops rotating.

12 Repeat steps 10 – 11 for additional editing. Stop the video unit and camcorder.

NOTES:

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack. ( pg. 11)

DV. IN

Press START/STOP on the remote control to engage the Record-Pause mode.

● The “ ” indication appears on the screen.

Set “REC MODE” to “SP” or “LP”. ( pg. 31, 34)

5

6 Turn on the video unit’s power.

7 Insert the source cassette in the video unit.

8 Insert the recording cassette in this camcorder.

9

DUBBING (cont.)

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3 Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

4 Set this camcorder’s Power Switch to “P” while pressing down the Lock Button located on the switch.

52 EN

Dubbing From A Video Unit

Equipped With A DV OUT

Connector (Digital Dubbing)

It is also possible to copy recorded scenes from another video unit equipped with a DV connector onto the camcorder. Since a digital signal is sent, there is little if any image or sound deterioration.

Connector Cover*

Core filter

To DV IN/OUT

DV cable (optional)

To DV OUT

Video unit equipped with DV

connector

* When connecting the cable, open the cover.

●If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. ( pg. 31, 40)

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 9. If this occurs, turn off the power and make connections again.

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 34)

●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

Image 52

Contents GR-DVP10 Dear Customer Important for owners in the U.KIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene… Provided Accessories pgHow To Use The Audio Cable How To Attach The Grip BeltRemove the pad and separate the two straps Attach the padHow To Attach The Strap Adjust the length with the adjusterReference Automatic Demonstration SelectPower Charging The Battery Pack10 EN About BatteriesUsing The Battery Pack Using AC PowerTo detach the battery pack Maximum continuous recording timeGrip Adjustment Viewfinder Adjustment12 EN Tripod MountingOperation Mode Power-Linked OperationOFF VideoDate/Time Settings 14 ENApproximate recording time Tape Recording mode Loading a Cassette Unloading a Cassette pg To protect valuable recordings…Make sure the camcorder’s power is off Open the card cover 16 ENBasic Recording Tape Remaining TimeNow calculating Blinking Blinking Blinking18 EN ZoomingJournalistic Shooting Interface ShootingTime code cannot be reset When a blank portion is recorded on a tapeTime Code Recording From The Middle Of a TapeLoad a cassette. pg Set the VIDEO/MEMORY Switch to Video To control the speaker volume…20 EN Normal PlaybackShuttle Search Blank SearchPlayback Zoom Slow-Motion Playback22 EN Basic Shooting D.S.C. Snapshot Power is supplied from the battery pack,To change the Image Size and/or Picture Quality, pg 24 EN Available only with the remote control provided. pgAuto Playback Of Images Playback Of Video Clips Playback Of Digital Sound Effects26 EN Index Playback Of FilesViewing File Information For Index Playback of video clip files, performTo Remove Protection To protect the currently displayed fileCard To remove protection from the currently displayed fileTo cancel deletion, select Return 28 ENDeleting Files To delete the currently displayed fileResetting The File Name To cancel selectionFolder and File names SELECT. The Sub MenuTo Reset The Number Of Prints 30 ENInitialising a Memory Card To Print By Selecting Still Images And Number Of PrintsMenus without Sub Menus Menus with Sub Menus32 EN Wipe Or Fader EffectsWIPE/FADER To deactivate the selected effect…Program AE OFF Deactivates Program AE with special effectsNightscope Night-Scope NightscopeWhite Balance Adjustment 34 ENExposure Control Camera MenuGain up Snapshot mode for video recordingNavigation time Manual Menu 36 ENManual System Menu SystemDisplay Menu 38 ENCamera Display DSC Menu DSCPicture quality Image sizeVideo Menu 40 ENVideo Snapshot For Video Recording Video DisplayOFF / LCD / LCD/TV OFF / Auto / onSelf-Timer Motor Drive ModeTo end Self-Timer recording, select OFF in step Set SELF-TIMER to On . pgAuto Focus Manual Focus44 EN Iris LockTo return to automatic iris Control To return to automatic exposure controlBacklight Compensation To return to automatic white balance…To cancel recording the sound effect midway 46 ENNavigation Function Downloading sound data from Web SiteTo add thumbnail images during video playback To delete thumbnail imagesMail Clip Recording 48 ENPress SET/SELECT. The Navigation screen appears Image To make video clips from recorded video footageTo use this camcorder as a player 50 ENTo use this camcorder as a recorder With a DV in Connector Digital DubbingDubbing To a Video Unit Equipped Make sure all units are turned off52 EN When connecting the cable, open the coverEquipped With a DV OUT Dubbing Still Images Recorded On Installing The Batteries 54 ENBeam Effective Area indoor use Buttons And FunctionsFrame-By-Frame Playback Slow-Motion PlaybackPlayback Special Effects Set 12bit Mode to Sound 2 or MIX. pg 56 ENAudio Dubbing To hear the sound during Audio DubbingInsert Editing VCR Code List VCR Brand Name 58 ENRandom Assemble Editing R.A.Edit Set Remote/VCR CodeConnector… Pause connector but equipped with anEdit connector… Make Connections60 EN Select ScenesFor More Accurate Editing Automatic Editing To VCRDiagnosing VCR/Camcorder Timing PauseUsing USB cable Using DV cable62 EN Connection To a Personal ComputerWebCam 64 EN ItemsPower Symptom Possible Causes Corrective ActionVideo and D.S.C. Recording VIDEO/MEMORY66 EN VIDEO/MEMORY Switch is Set the VIDEO/MEMORYVIDEO/MEMORY Set the VIDEO/MEMORY Advanced features Program AE with special Power Switch is set to pg Subject Press Back LightOther problems 68 ENColoured bright spots appear LCD monitor pg , 31General Battery Precautions Battery Packs70 EN CassettesMemory Cards LCD MonitorMain Unit Do NOT…How To Handle a CD-ROM 72 ENAbout moisture condensation Serious malfunctioningCleaning The Camcorder Slide down BATT.RELEASE 1 and remove the battery pack 2After Use Turn off the camcorder74 EN USB VTR76 EN Indicators ConnectorsControls Other Parts78 EN IndicationsC. Playback LCD Monitor/Viewfinder Indications During Video Playback80 EN FunctionAppears when a file in a format other than MP3 is selected Being used as a recorderTo use digital sound effects Memory card playback82 EN Wide Mode Wide Mode Sound Mode Sound ModePlayback sound Program AE With Special Effects Program AEGR-DVP10