54 EN | USING THE REMOTE CONTROL UNIT |
The
Installing The Batteries
The remote control uses two “AAA (R03)” size batteries. Refer to “General Battery Precautions” ( pg. 70).
1Remove the battery compartment cover while pushing up the tab as illustrated.
2Insert two “AAA (R03)” size batteries in the correct direction.
3
AInfrared beam transmitting window Transmits the beam signal.
The following buttons are available only when the camcorder’s Power Switch set to “P”.
B DISPLAY Button | ( pg. 22, 50, 59) | |
C SHIFT Button | ( pg. 55, 58) | |
D SLOW Rewind/Forward Buttons | ....... ( pg. 55) | |
Left/Right Buttons | ( pg. 55) |
EREW Button
•Rewind/Reverse Shuttle Search
on a tape | ( pg. 21) |
•Displays previous file |
|
in a memory card | ( pg. 24) |
F FADE/WIPE Button | ( pg. 60) |
G EFFECT ON/OFF Button | ( pg. 55) |
H EFFECT Button | ( pg. 55) |
I PAUSE IN Connector | ( pg. 59) |
1
3 Tab 2 +
– +
–
J MBR SET Button | ( pg. 58) |
K Up Button | ( pg. 55) |
INSERT Button | ( pg. 57) |
L Down Button | ( pg. 55) |
A. DUB Button | ( pg. 56) |
M PLAY Button |
|
•Starts Playback of a tape | ( pg. 20) |
•Starts Auto Playback of images |
|
Insert the minus
Beam Effective Area (indoor use)
When using the |
| |
remote control, be |
| |
sure to point it at the |
| |
remote sensor. The |
| |
transmitted beam’s |
| |
approximate effective |
| |
distance for indoor | Remote sensor | |
use is 5 m. | ||
|
NOTE:
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
Buttons And Functions
in a memory card | ( pg. 24) |
NFF Button
•Forward/Forward Shuttle Search
on a tape | ( pg. 21) |
•Displays next file |
|
in a memory card | ( pg. 24) |
O STOP Button |
|
•Stops the tape | ( pg. 20) |
•Stops Auto Playback | ( pg. 24) |
P PAUSE Button |
|
Pauses the tape | ( pg. 55) |
Q R.A.EDIT Buttons | ( pg. 58 – 61) |
The following buttons are available when the camcorder’s Power Switch set to “A” or “M”.
aZoom (T/W) Buttons
Zoom in/out | ( pg. 18, 55) |
(Also available with the Power Switch set to “P”)
bSTART/STOP Button
Functions the same as the Recording Start/Stop Button on the camcorder.