EN 47
To make thumbnail images during video recording automatically
1Load a cassette. ( pg. 15)
2Load a memory card. ( pg. 16)
3Set the VIDEO/MEMORY Switch to “VIDEO”.
4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
5Set “NAVIGATION” to the desired navigation storing time. ( pg. 31, 35)
●If the “
” indicator appears blinking on the screen, wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded.
6Press the Recording Start/Stop Button to start recording.
● When the recording time is over the navigation time set in step 5, “
” appears briefly, then the image of the point where recording is started is captured and stored in the memory card as a thumbnail image.
●If the Recording Start/ Stop button is pressed
before “
” stops
blinking, the image of the point where the loaded memory card is recognised is captured.
7Press the Recording Start/Stop Button to stop recording.
To make thumbnail images after video recording
manually...
1)Perform steps 1 to 4 above.
2)Set “NAVIGATION” to “MANUAL”. ( pg. 31, 35)
3)After the recording, press NAVI STORE.
•The “
” indicator appears briefly and the captured image is stored in the memory card as a thumbnail image.
NOTES:
●The remaining number of storable thumbnail images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “ 
/
” in DSC Menu, the number shows how many 640 x 480 pixel images can be stored.
●If “5S” is set to “5S” or “Anim.” in MANUAL Menu, the NAVIGATION function will not work properly.
To find scenes on tape using thumbnail images (NAVIGATION Search)
1Load a cassette. ( pg. 15)
2Load a memory card. ( pg. 16)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
5Press NAVI during video playback or stop mode.
● The loaded cassette’s |
| NAV I GAT I ON | |||
NAVIGATION thumbnail | DATE : 2 4 | . 2 5 | . 0 4 | 3 1 5 : 2 9 | |
image screen appears. | TC | : 1 3 | : 2 3 | : 1 5 |
|
1 |
| 2 |
| 3 | |
● Turn the SHUTTLE | 4 |
| 5 |
| 006 |
SEARCH Ring to the left |
|
| |||
|
|
|
|
| |
(3) to display the |
|
|
|
|
|
previous page. Turn the
SHUTTLE SEARCH Ring to the right (5) to display the next page.
6Press + or – to select the desired image, and press
SET/SELECT.
●The “NAVIGATION SEARCH” indication appears blinking and the camcorder starts searching the tape for the relevant point of the selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring to the left (3) or to the right (5).
To add thumbnail images during video playback
1Perform steps 1 to 4 in “To find scenes on tape using thumbnail images (NAVIGATION Search)”.
2Press 4/9 to start video playback.
3Press NAVI STORE at the desired point.
●The “
” indicator appears briefly and the image of the point where NAVI STORE is pressed is stored in the memory card as a thumbnail image.
To delete thumbnail images
1Load a memory card. ( pg. 16)
2Set the VIDEO/MEMORY switch to “VIDEO”.
3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
4Press MENU. The Menu Screen appears.
5Press + or – to select “t”, and press SET/ SELECT. The VIDEO Menu appears.
ADVANCED FEATURES
CONTINUED ON NEXT PAGE