JVC GR-DVP10 manual WebCam

						EN 63
	Using The Camcorder As A					1 Make sure all necessary software (provided) are
						installed in your PC and all units are turned off.
	WebCam					2 Connect the camcorder to your PC using the USB
						cable.
This camcorder can be used as a WebCam via USB						3 Set the VIDEO/MEMORY Switch to “MEMORY”.
connection.						4 Set the Power Switch to “A” or “M” while
						pressing down the Lock Button located on the
						switch.
						5 Turn on the PC.
						● “ ” appears on the screen.
						● If the PC is not powered on, the camcorder
						does not enter the Web Camera mode.
						6 When finished, turn off the PC first, then the
					Connector Cover*	camcorder. Disconnect the USB cable from the
						camcorder and PC.
						NOTES:
						● It is recommended to use the AC Power Adapter/
						Charger as the power supply instead of the
						battery pack. ( pg. 11)
				To USB		● Use the provided software PIXELA ImageMixer to
						capture video in real time.
						● You can also use the camcorder for web
				USB cable		conference by using Microsoft Windows®
				(provided)		NetMeeting® and signing up for MSN Hotmail.
						● In the Web Camera mode, the following buttons
			To USB			cannot be operated: E-MAIL, SNAPSHOT, INDEX/
		connector				NAVI, NAVI STORE, D.SOUND, the Recording
						Start/Stop Button.
						Refer to the instruction manuals of the PC and
						provided Software.

USB-equipped PC

* When connecting the cable, open the cover.

ADVANCED FEATURES