56 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Audio Dubbing
The audio track can be customised only when recorded in the
Stereo Microphone
Headphone |
|
Connector | Speaker |
●If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.
●If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.
●If you change from
●During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in
●To perform Audio Dubbing while watching on the television, make connections. ( pg. 22)
●To perform Audio Dubbing with a video unit connected to the camcorder’s S/AV connector, first set “S/AV INPUT” to “A/V.IN” in VIDEO Menu. ( pg. 31, 40)
The “AUX” indication appears instead of “MIC”.
A.DUB
PLAY
PAUSE
STOP
1Play back the tape to locate the point where editing will start, then press PAUSE (9).
2While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” and “MIC” indicators appear.
3Press PLAY (U), then begin “narrating”. Speak into the microphone.
● To pause dubbing, press PAUSE (9).
4To end Audio Dubbing, press PAUSE (9), then STOP (8).
To hear the sound during Audio Dubbing...
Connect optional headphones to the headphone connector or use the S/AV connector, and set the “12bit MODE” to the desired mode; •“SOUND 1” for the playback sound. •“SOUND 2” for the dubbed sound.
•“MIX” for the playback and dubbed sound.
To hear the dubbed sound during playback…
Set “12bit MODE” to “SOUND 2” or “MIX”. ( pg. 31, 40)
NOTES:
●When editing onto a tape that was recorded at
Audio Dubbing Using Digital Sound Effects
INDEX | MENU Button | |||||
Button |
|
|
| +, – Button | ||
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SET/SELECT
Button
D.SOUND Button/Stop
(8) Button
A.DUB
PLAY
PAUSE
STOP